How to Use LOOPIX Wound Drainage Tube Fixing Device

Please strictly follow the Instruction for Use, no matter in testing or clinical application.

Step 1. Clean & Dry

Wipe the skin to make sure it is clean and dry before application.

Step 2. Remove Releasing Paper

Make the drainage tue pass through the rotating ring. Peel off the #1 release paper, then stick the Loopix closely to the skin.

Step 3. Center the Loopix

Center the LOOPIX and attach the adhesive pad to the skin, then peel off the #2 releasing paper, making sure the pad is fully attached.

Step 4. Place C-shape Gauze

Make the C-shape gauze passed through the tube, then place the gauze in the loop for absorbing exudate.

Step 5. Rotate the Loop

Rotate the loop (blue ring) clockwise, the hidden hoops will tighten the tube as rotating.

Step 6. Double Secure

Fasten two ratchet ties to stabilize the direction of tube.

Adjustment Step. Readjust or Remove the Loopix

Hold the buttons pointed by red arrows in the right image, and rotate counterclockwise meanwhile to release the hoops to adjust/change/remove the tubes.

An instruction video for LOOPIX Releasing and Adjustment

In this video, you can find out how to release the cable ties and loop hoops. Contact us if any questions about operation instructions.

Graphic Instructions and Cautions

The following is a PDF file showing how to use LOOPIX. Down and save it on your device or print it for operation instructions in clinical application.